FAN INSTALLATION ILLUSTRATION
1. Secure the mounting plate
to a ceiling joist with two
screws,spring washers and
flat
washers
Ensure the support for the
mounting plate must be
capable
securely holding the moving
weight of the fan.
3. Insert the remote control
receiver
bracket and the ball joint.
17
Herramienta necesaria
Ferramenta necessária
tool needed
provided.
of
safely
between
2. Hang the fan assembly on
to the mounting plate.The
mounting plate has a lug on
it;This should be lined up
with
groove on the fan assembly
and
ball joint.
CABLE CONNECTION
Brown wire
Blue wire Green/
the
4. Connect the wires from
the earthed mains supply to
the terminal block.
the
corresponding
yellow stripes wire