10.Install the glass shade on
to the switch housing by
tightening the three thumb
screws.
CAUTION: Do not use pliers
to tighten the thumbscrews.
Over
tightening
thumb screws may crack the
glass
shade
dangers.
OPERATING YOUR FAN
Select the fan speed by pressing the spe ed control
●
button on the remote control transmitter:
HI: High Speed MED: Medium Speed LOW: Low Speed OFF: Off
The switch on motor housing for controlling the fan
●
blades rotating direction controls the direction of air
movement.
Caution: Before using this rotating direction switch, turn
OFF the fan and ensure the fan stops rotating to prevent
injury to yourself and damage to the motor.
Cold weather: Push the switch "UP" so that the blades will
bring the warm air trapped near the ceiling fan to move
downwards throughout the room.
Hot weather: Push switch "DOWN "so that the blades will
create a breeze and circulate the air to the room.
Pressing the "ON/OFF" light button on the remote
●
control transmitter can control the turning on or off of the
light.
19
of
the
and
cause