错误诊断表格; 技术数据 - SICK WTT190L-A Serie Instrucciones De Operación

53
故障排除
53.2 错误诊断表格
54 技术数据
54.1 技术数据
激光等级
开关距离
最大开关距离
光斑直径/距离
供电电压 U
B
输出电流 I
max.
开关频率
最长响应时间
模拟输出
96
LED 指示灯 / 故障界面 /
LED indicator/fault pattern
绿色 LED 未亮起 /
Green LED does not light up
绿色 LED 未亮起 /
Green LED does not light up
绿色 LED 未亮起 /
Green LED does not light up
黄色 LED 亮起，光路中无物
体 /
Yellow LED lights up, no
object in the path of the
beam
光路中有物体，黄色 LED 未
亮起 /
Object is in the path of the
beam, yellow LED does not
light up
原因 /
Cause
无电压或电压低于极限值 /
No voltage or voltage
below the limit values
电压中断 /
Voltage interruptions
传感器损坏 /
Sensor is faulty
传感器和背景之间的间距过
小 /
/ Distance between the
sensor and the background
is too short
传感器和物体之间的间距过
大或开关距离设置的过小 /
Distance between the
sensor and the object is too
long or sensing range is set
too short
措施 /
Measures
检查电源，检查整体电气连
接（导线和插头连接） /
Check the power supply,
check all electrical
connections (cables and
plug connections)
确保电源稳定无中断 /
Ensure there is a stable
power supply without
interruptions
如果电源正常，则更换传感
器 /
If the power supply is OK,
replace the sensor
降低开关距离，参见图 F /
Reduce the sensing range,
see graphic F
增大开关距离，参见图 F /
Increase the sensing range,
see graphic F
WTT190L-Axxx
1
0.2 ... 3.0 m 1)
0.2 ... 3.0 m 1)
< 12.0 mm / 3,0 m
DC 12 ... 30 V
≤ 100 mA
AVG 1: 833 Hz, AVG
4: 500 Hz, AVG 16:
147 Hz, AVG 64: 38
Hz, AVG 256: 10
Hz
2)3)4)
AVG 1: 0.6 ms, AVG
4: 1 ms, AVG 16: 3.4
ms, AVG 64: 13 ms,
AVG 256: 51.4
ms
5)3)4)
4 mA ~ 20 mA (≤300
W) / 0 V ~ 10 V
(≥10 kW) / 可切换
8020032.17U4 | SICK
Subject to change without notice