To change the temperature unit used on the primary
readout (DT61) or the primary and secondary
readouts (DT62), press the K, °F, °C button. Both
models will "remember" the last selection and
resume using that unit following a reboot.
DISPLAYING MIN/MAX/AVG
TEMPERATURES
To display the minimum, maximum or average
values of T1 (DT61) or T2 or T1-T2 (DT62) sensed
during a measurement session (the period of time
since the thermometer was last powered on), begin
by briefly pressing the MAX/AVG/MIN button once.
One press of the button causes the maximum value
to be displayed on the secondary readout while the
primary readout continues to track real-time
temperature(s).
Briefly press the MAX/AVG/MIN button a second
time to switch to showing the minimum temperature
on the secondary readout. Briefly press the button a
third time to show the average temperature over the
duration of the measurement session on the
secondary readout.
To exit Min/Max/Avg display mode and resume
real-time display mode, press and hold the
MAX/AVG/MIN button for at least 3 seconds.
SPECIFICATIONS
Measurement Ranges: -328° to 2501°F (-200° to
1372°C) with "K" type thermocouple(s)
-346° to 2192°F (-210° to 1200°C) with
"J" type thermocouple(s)
-418° to 752°F (-250° to 400°C) with
"T" type thermocouple(s)
-238° to 1832°F (-150° to 1000°C) with
"E" type thermocouple(s)
13