General DT61 Manual Del Usuario página 6

and change values of temperature compensation,
Auto Power Off triggering time, relative time clock
and local power line frequency. On DT62, also used
to select thermocouple type (during Step 1 of Setup
procedure).
Fig. 2. All possible display indications
1. Auto Power Off enabled indicator
2. Low battery icon
3. OFFSET. Indicates that primary readout is showing
thermocouple temperature compensation value
4. SETUP. Flashes during setup procedure
5. READ. Not used on DT61 or DT62
6. REC. Not used on DT61 or DT62
7. HOLD. Indicates that primary readout is showing
held value
8. K, °F, °C. Primary readout temperature unit
9. Primary readout
10. MAX, MIN, AVG. Indicates which value is shown
on primary readout
11. MEM. Not used on DT61 or DT62
12. K, °F, °C. Secondary readout temperature unit
13. Secondary readout
14. USB. Not used on DT61 or DT62
6