Setting The Temperature - Fulgor Milano CO 4512 TC Instrucciones Para El Usuario

The control suggests a temperature for each function, which you can change at any time, but
if you consider it suitable, you don't need to do anything else, the oven will start by itself in just
a few seconds!

Setting the temperature

The uses a temperature probe that is accurate to ±5 °C for the maximum reliability of the cooking
temperatures requested.
You can change the temperature at any time. After selecting the cooking function, just touch the
symbols and the setting range varies from +50 °C to MAX.
You don't need to confirm the change, the control turns on by itself after a few seconds.
NOTE: some models may display the current temperature in the oven until the temperature set is
reached. If you want to check the temperature set, press any one of the
you can use them to change the temperature set.
During heating, the centigrade symbol (°C) flashes
to indicate that it is heating up to reach the selected
temperature. When the temperature is reached, it
beeps.
55 55
buttons and, if you wish,
GB GB