Publicidad
Step 5
Step
Place a LEVELER BRACKET (17E) over the holes in the bottom
å
edges of the ENDS (A and B).
Use a hammer to drive a PROPEL NUT (14M) through each
å
BRACKET and into the holes in the ENDS. Now, turn an
ADJUSTABLE GLIDE (16E) into each PROPEL NUT.
NOTE: To raise a corner of the unit, turn the ADJUSTABLE
å
GLIDE counter-clockwise. To lower a corner, turn the
ADJUSTABLE GLIDE clockwise.
Page 10
B
A
17E
419606
14M
16E
www.sauder.com/services
Publicidad
