Publicidad
Step 13
Step
1
D498
H
Groove
Insert the DRAWER SIDES (D205 and D498) at an angle
å
into the slot at each end of the DRAWER FRONT (H).
3
M63
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M63) to the DRAWER
å
FRONT (H). Tighten one HIDDEN CAM.
Page 18
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D205
1
2
H
VIEW THE T-LOCK BOX VIDEO
2
U n
fi n
s u
i s h
r f a
e d
c e
D498
H
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (B35) into the grooves in
å
the DRAWER SIDES (D205 and D498) and DRAWER
FRONT (H).
4
D498
M63
Fasten the DRAWER BACK (D499) to the DRAWER
å
SIDES (D205 and D498) and DRAWER BRACE (M63).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Repeat this step for the other DRAWER.
419606
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
B35
D205
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
D499
D205
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
www.sauder.com/services
Publicidad
