Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (7F) into the large holes in the BACK (F).
Repeat this step for the ENDS (A and B), BOTTOM (D),
and SHELF (E).
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
(18 used)
7F
Page 6
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
F
419606
Some assembly
(and snacks) required.
STOP
If you purchased
the 419708 Hutch,
assemble it fi rst.
7F
www.sauder.com/services
Publicidad
