Adjusting The Built-In Clock - AND UA-767F Manual De Instrucciones

Adjusting the Built-in Clock

Adjust the clock prior to use.
1. Press and hold the
year starts blinking.
2. Select the year using the
Press the
SET
year and move to month/day selection. The
date can be set anywhere between the years
2013 and 2059.
3. Select the month using the
Press the
SET
month and move to day selection.
4. Select the day using the
Press the
SET
and move to hour/minute selection.
5. Select the hour using the
Press the
SET
hour and move to minute selection.
6. Select the minute using the
Press the
START
device off.
Holding down the
change the value continuously.
Note: After three minutes of non-operation, the
device will turn off automatically.
When the clock has not been set, the
clock display indicates dashes as
shown to the right.
When using the device for the first
time, the clock is not adjusted.
When the device is disconnected
from the power supply, the set date
and time will be erased.
When the set date and time is
erased, please adjust again.
Using the Monitor
button until the
SET
or
button to set the current
or
button to set the current
or
button to set the current day
or
button to set the current
or
or button to turn the
SET
or button will
English 12
Press and hold
button.
button.
button.
button.
button.
Year
or
Month
Day
or
Hour
Minute
or
START
Turn off
Pressing the
START
button will turn the
device off anytime.
or
or
or