Using The Monitor; Installing The Batteries - AND UB-401 Manual De Instrucciones

Using the Monitor

1. Installing the batteries

1. Slide the battery cover as shown to
remove it from the device.
2. Insert two Micro batteries in the box, with
positive (+) and negative (-) terminals
matching those indicated on the cuff.
3. Slide the battery cover back on the
device.
• Insert the batteries as shown on the cuff. If not, the device will not work.
• When
batteries with new ones at the same time. Do not mix old and new batteries. It
may cause the battery life to be shortened, or the device to malfunction.
• (LOW BATTERY mark) does not appear when the batteries are drained.
• Battery life varies with the ambient temperature and may be shorter at low
temperatures.
• Remove batteries if the device is not to be used for a long period of time. The
batteries may leak and cause a malfunction.
• Use the specified batteries only. The batteries provided with the device are for
testing the monitor performance and may have a shorter life.
(LOW BATTERY mark) appears in the display, replace all
ENGLISH 4