Schlage L9000 Serie Instrucciones De Instalación página 4

11
Install outside INDICATOR with cylinder (if applicable)
Steps 8a – 8g for INDICATOR TRIM ONLY
11a Install the indicator mounting plate.
Functions
L/LV9050
L/LV9056
L/LV9060
L/LV9070
L/LV9071
L/LV9456
L/LV9457
L/LV9458
L9460
L9462
L9463
L9464
L9465
L9466
L9473
L/LV9485
LM/LMV9350
LM/LMV9370
LM/LMV9371
11b Adjust the cam spindle length.
Cut the spindle at the appropriate mark
according to door thickness.
For 2Z\v" door do not cut the spindle.
11c Install the indicator slide and cam.
11d Connect the cam to the indicator slide. The cam must
Mounting plate
11e Insert key halfway into the cylinder.
11f Install the indicator faceplate and cylinder with cylinder
Indicator
slide
Cam
11g Rotate cylinder clockwise.
engage either the left or right side of the indicator slide
according to door handing and indicator location.
• Unlock the door.
• Move the indicator slide against the top rim of the
mounting plate (unlocked position).
• Assemble the cam as shown.
Door Hand/Indicator Location
Lock Type
Non-deadbolt RH/Outside
functions
LH/Inside
Deadbolt RH/Inside
functions
LH/Outside
spring as shown.
RH/Inside
LH/Outside
RH/Outside
LH/Inside
Indicator
faceplate
Key inserted
halfway
4