Customer Service - Schlage L9000 Serie Instrucciones De Instalación

2c Remove the outside cylinder.
Insert the key halfway into the cylinder and rotate cylinder
counterclockwise to remove.
Key inserted halfway
3
Check door preparation
IMPORTANT
• To install the indicator trim, additional door preparation
may be required. If additional door preparation is required,
remove the lock chassis from the door before drilling. Steps
for reassembly are included in this instruction sheet.
• Please refer to the template included in this package.
• Make sure the door is prepared with any necessary holes for
the indicator trim.
4
Complete installation of indicator trim
Go to STEP 11 ON PAGE 4 and follow the instructions to
complete the installation of the indicator trim.

Customer Service

1-877-671-7011 www.allegion.com/us