Pit Boss PB336GS Manual De Instrucciones página 4

2. MOUNTING THE GREASE CUP
Parts Required:
Grease Cup Holder (#4)
1 x
Grease Cup (#3)
1 x
Installation:
• First, remove the pre-installed two
bolts on the left side of the Fire Box.
• Next, fasten the Grease Cup Holder
to the left side of the Fire Box using
the two bolts previously removed.
• Place the Grease Cup into the
Grease Cup Holder, as shown.
3. INSTALLING THE REGULATOR
Parts Required:
Regulator (#5)
1 x
Installation:
• Install the Regulator end to the Fire
Box valve, rotating to lock.
• The unit is now assembled.
4