Storage; Disposal /Enviromental Protection; Replacement Parts/Accessories - Grizzly Tools ERM 1600-34 L Traducción Del Manual De Instrucciones Original

1. Turn the equipment over.
2. Use sturdy gloves and hold the
blade (17) firmly. Loosen the
blade bolt (16) with the supplied
spanner (5).
3. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened firmly.

Storage

Clean the equipment before putting it
away (see "General Cleaning and Mainte-
nance Work").
In order to save space, loosen the
wing nuts (3) and fold the central struts
(2) downwards and place the handle
(1) on them. Make sure that the cable
of the device (10) is not pinched.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Disposal /Enviromental
Protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center. Be environ-
mentally friendly. Return the tool, acces-
sories and packaging to a recycling centre
when you have finished with them.
Machines do not belong with do-
mestic waste.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.
Defective units returned to us will be dis-
posed of for free.
Replacement parts/
Accessories
Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you have any other questions, contact
the "Service-Center (see "Service-Cent-
er").
GB
67