Safety Precautions; General Safety Guidelines - HP Designjet L26500 Información Preliminar

Introductory information
Other sources of information
The following documents are provided with your printer, and can also be
downloaded from:
http://www.hp.com/go/L26500/manuals
http://www.hp.com/go/L26100/manuals
Site preparation guide
●
Installation guide
●
User's guide
●
Maintenance and troubleshooting guide
●
Legal information
●

Safety precautions

Before using your printer, read the following safety precautions to make sure you
use the equipment safely.
You are expected to have the appropriate technical training and experience
necessary to be aware of hazards to which you may be exposed in performing a
task, and take appropriate measures to minimize the risks to yourself and to other
people.

General safety guidelines

Refer to the installation instructions before connecting the printer to the supply.
●
There are no operator-serviceable parts inside the printer except those
●
covered by HP's Customer Self Repair program (see
go/selfrepair). Refer servicing of other parts to qualified service personnel.
Turn off the printer, unplug both power cords from the power outlets, and call
●
your service representative in any of the following cases.
◦
◦
◦
◦
◦
◦
Turn off the printer and unplug both power cords from the power outlets in
●
either of the following cases.
◦
◦
ENWW
The power cord or plug is damaged.
Liquid has entered the printer.
There is smoke or an unusual smell coming from the printer.
The printer has been dropped or the drying or curing module damaged.
The printer's built-in Residual Current Circuit Breaker (Ground Fault
Circuit Interrupter) has been repeatedly tripped.
The printer is not operating normally.
During a thunderstorm
During a power failure
http://www.hp.com/
Other sources of information
EN
1