Relationship To The Authorities - Jøtul F 400 Instrucciones Para Instalación

ENGLISH
Table of contents

Relationship to the authorities

Technical data of Jøtul F 400 ................................................ 33
General safety precautions .................................................... 33
Measures to prevent fires ...................................................... 33
Installation of Jøtul F 400
Foundations .............................................................................. 33
Chimney ..................................................................................... 33
Air circulation ............................................................................. 33
Assembly prior to installation .............................................. 34
Control of functions ................................................................ 34
Mounting of flue pipe ............................................................ 34
Connection to chimney .......................................................... 34
Operating instructions
Initial lighting and daily use ................................................. 35
Initial lighting ............................................................................ 35
Daily use ..................................................................................... 35
Maintenance
Cleaning the glass .................................................................... 35
Ash removal ............................................................................... 35
Cleaning and soot removal ................................................... 35
Sweeping of flue pipes to the chimney ............................ 36
Control of the stove ................................................................ 36
External maintenance ............................................................. 36
The length, quantity and quality of logs .......................... 36
Jøtul's definition of quality wood ....................................... 36
Service
Replacing the burn plates ...................................................... 36
Replacing the baffle plate ..................................................... 36
Optional equipment
Short legs .................................................................................... 36
Figures - drawings .................................................... 64- 65
32
Relationship to the
authorities
Jøtul F 400 is a clean-burning product for solid fuel.
Installation of a fireplace must be according to local codes
and regulations in each country. Always contact your local
building inspector or the appropriate authority responsible
for local codes and regulations in your district.
Your dealer has been specially selected for his knowledge
of your local codes and may provide assistance in ensuring
that your installation is safe and legal.
Instructions for mounting, installation and use are enclosed
with the product. The installation may only be used when it
has been inspected and a certificate of completion has
been issued.
The product data plate is located on the bottom heat shield
and is made of heat-resistant material. The following
information is listed on the data plate: Manufacturer and
address, model number, manufacturing number, rated heat
output, registration number (after assignment), style, and
safety measurements.
Pre-installation checks
Warning! Please ensure that there is adequate ventilation
to the room in which the stove is to be installed. An air brick
or wall vent with a minimum size of 9" x 3" (230 x 75mm) is
needed to supply air to the fire.
Insufficient ventilation may cause oxygen depletion in the
room. This can lead to drowsiness, nausea and sickness
and is extremely dangerous.
It is important to ensure that the chimney or flue system
to which the stove is to be connected is working properly.
Combustion by-products which pervade enclosed spaces
such as a room represent a serious health risk. The chimney
and/or flue system must therefore be inspected and
approved by a qualified professional prior to installation.
Special attention must be paid to the following:
The chimney or flue system must comply with the Building
Regulations for heat producing appliances.
The minimum height of the chimney must be 12' (4m). This
height should be measured from the hearth to the top of
the flue. Any damper plates or flue restrictors must be
removed and no restrictor plates should be fitted. Where it
is impractical to remove dampers or restrictors, these must
be secured in the open position.
The chimney or flue must be sound and clean. If it has been
used with a wood, coal or other solid fuel fire, it must be
swept before the stove is installed. Ensure that only one
stove is served by the chimney or flue system.