Hach SD900 Manual Básico Del Usuario página 10

Figure 3 Single bottle installation
1 Polyethylene bottle, 10 L (2.5 gal) (1918)
2 Glass bottle, 10 L (2.5 gal) (6559)
3 Support (1502)
4 Polyethylene bottle, 15 L (4 gal) (1367)
5 Polyethylene bottle, 19 L (5 gal) (6498)
Install the first bottle for multiple sample collections
Use multiple bottles to collect samples into separate bottles or into more than one bottle. The
distributor moves the sample tube above each bottle. Install the bottles in the sampler base as shown
in Figure 4. Install the first sample bottle (number 1) below the label in the sampler base. Install the
remaining bottles in increasing numbers in the direction shown by the label. Refer to
on page 12 for a diagram of necessary components.
10 English
6 Polyethylene bottle, 21 L (5.5 gal) (6494)
7 Compact base (8975)
8 Standard insulated base (8976)
9 Standard insulated base for 21 L (5.5 gal) bottle
(8561)
Figure 5