Operation; Prior To Initial Commissioning And After A Longer Standstill - Abicor Binzel ABICOOLER 1300 Manual De Instrucciones

ABICOOLER 1300

7 Operation

Risk of injury from hot coolant
If the coolant tank is opened during or immediately after operation, coolant may spray out and cause
burns or irritation to skin and mucous membranes.
► Keep the coolant tank closed during operation.
► Wait at least 5 seconds after switching off before opening the screw cap of the coolant tank.
► Check and wear your personal protective equipment.
► Switch the device on and off with the ON/OFF switch.

7.1 Prior to initial commissioning and after a longer standstill

Bleed the device and cable assembly.
1
 6.2.2 Bleed the device auf Seite EN-12
 6.2.3 Bleeding the cable assembly auf Seite EN-13
Check the tightness of the coolant connections.
2
WARNUNG
Warm the heat-shrinking tube and insulate the
6
connection point.
Place the lines in the connection housing and
7
assemble the connection housing.
Insert the flow control's plug in the connection on
8
the device.
7 Operation
EN - 15