Replacing The Fuse - Abicor Binzel ABICOOLER 1300 Manual De Instrucciones

9 Maintenance and cleaning

9.3 Replacing the fuse

EN - 18
ABICOOLER 1300
Fill the new coolant only up to the MAX line.
6
 6.2 Initial commissioning auf Seite EN-11
Seal the filler neck with the screw cap.
7
Loosen the fuse holder on the back side of the
1
device using a suitable flathead screwdriver.
Remove the fuse holder and fuse.
2
Remove the fuse from the fuse holder.
3
Insert the new T2A fuse (5 × 20 mm).
4
Mount the fuse holder with the new fuse in
5
the device.