Clarke Focus II Disc 26 Manual De Instrucciones página 114

Clarke ® LIMITED U.S. WARRANTY
This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under
normal use and service, when operated and maintained in accordance with Clarke's Maintenance and Operations instruc-
tions. The warranty period is subject to the conditions stated below.
3 YEARS FOR PARTS AND 1 YEAR FOR SERVICE LABOR (See exceptions below)
Motors must be inspected for carbon motor brush wear at six-month intervals by an authorized Clarke repair station. Failure
to comply with the six-month inspection requirement or failure to replace worn motor brushes identified during the inspection
will void the warranty on the motors. Cost of the six-month inspection and replacement of carbon motor brushes is the
responsibility of the purchaser. In the event of a warranty claim on the motors, proof of inspection and any required motor
brush replacement must be provided. This warranty is extended only to the original purchaser for use of the product. It does
not cover normal wear parts such as electrical cable, rubber parts, hoses and motor brushes.
BATTERY WARRANTY
In addition to the items above, any original equipment Clarke Battery which becomes unserviceable under normal use within
a period of ninety (90) days from date of sale to the original user will be repaired or replaced with one of equal specification
at our option, F.O.B. any authorized Clarke Sales or Service Branch, with no charge to the user, except transportation costs.
After expiration of the above ninety (90) day period, any battery which fails under normal use will be adjusted to the original
user with a new battery of equal specification on an eighteen (18) months pro rate basis from the date of purchase. Adjust-
ment will be determined using the then current list price, plus transportation costs.
Warranty is rendered null and void if battery is not kept filled to the proper level with DISTILLED WATER.
®
CLARKE: POLYDUR AUTOMATIC SCRUBBER SOLUTION AND RECOVERY TANK EIGHT-YEAR U.S.
GUARANTEE
Your new Clarke machine has polydur Solution and Recovery Tanks. Polydur is a rotationally molded, low-density linear
polyethylene that won't crack or dent, and withstands most corrosives and temperature extremes. Clarke backs up your
Polydur tanks with an eight-year guarantee. If a tank breaks or leaks under normal use within eight years of the date of
purchase, it will be replaced free.
STATED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED
Clarke's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to purchaser
in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE ARE NO WARRANTIES
WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your
Clarke product. Return the card to assist Clarke in providing the performance you expect from your new floor machine.
If a difficulty develops with the product, you should: a) Contact the nearest authorized Clarke repair location or contact the
Clarke Service Operations Department, 2100 Highway 265, Springdale, Arkansas 72764, for the nearest authorized Clarke
repair location. Only these locations are authorized to make repairs to the product under this warranty. (b) Return the
product to the nearest Clarke repair location. Transportation charges to and from the repair location must be prepaid by the
purchaser. Clarke will repair the product and/or replace any defective parts with out charge within a reasonable time after
receipt of the product.
Clarke, 2100 Highway 265, Springdale, Arkansas 72764.
Clarke reserves the right to make changes or improvements to its machine without notice.
Always use genuine Clarke Parts for repair.
2100 Highway 265
Springdale, Arkansas, 72764
®
Clarke
-114- Operator's Manual - FOCUS II MID-SIZE AUTOSCRUBBER ®