Easy Home R09 Manual De Instrucciones página 20

Remote control operation
6 RESET button:
When you press the recessed RESET button,
all current settings are canceled and the control
will return to the initial settings. To press RESET
button, please use a small pin or paper clip.
7 FAN button:
Used to select the fan speed - AUTO, LOW,
MED or HIGH. Each time the button is
pressed, the fan speed mode is shifted.
8 TIMER button:
This button is used to set the time ON
(start to operate) and the time OFF
(cease to operate).
9 CANCEL button:
If the TIMER OFF has been set, pressing
the CANCEL button will cancel the timer
off setting and turn on the unit.
If no Timer feature has been set, pressing the CANCEL button will do nothing.
10 CLOCK button:
Use to set the time.
11 LED button:
Pressing this button will clear the digital display in the air conditioner, press it again
to activate.
12 LOCK button:
Pressing the LOCK button will lock all current settings and the remote control will not
accept any operation except those that have been locked. Press again to cancel LOCK
mode. To press LOCK button, please use a small pin or paper clip.
Remote control operation
A U T O
C LO C K
SET TEMP .
O N
O FF
FAN SPEED
2
E
F
1
3
20