Automatic Operation - Easy Home R09 Manual De Instrucciones

Automatic operation

When you set the air conditioner to AUTO mode,
it will automatically select Cooling or Fan Only
operation, depending on what temperature you
have selected and the room temperature.
Once you select the operating mode, the oper-
ating conditions are saved in the unit's memory.
Thereafter, the air conditioner will start operating
under the same conditions when you simply
push the ON/OFF button of the remote control.
Start: Ensure the unit is plugged in and power
is available. The operation light on the display
panel of the unit will light up.
1. Press MODE select button. Press to select AUTO.
2. TEMP/TIME button: Set the desired temperature, typically between 62-86
3. ON/OFF button: When the air conditioner is off, push this button to start it.
Stop: Press the ON/OFF button again to stop the air conditioner. If the AUTO mode is
SET TEMP .
uncomfortable, you can select the desired conditions manually. When you select the AUTO
mode, you do not have to set the fan speed. The fan speed will be automatically controlled.
E
F
AUTO COOL
1
2
3
1
2
1
Automatic operation
DRY FAN
C LO C K SET TEMP .
FAN SPEED
4
3
F (17-30 C).
o o
C LO C K SET TEMP .
FAN SPEED
A U T O
C LO C K SET TEMP .
FAN SPEED
2
23