Fan Only Mode; Cool Dry Fan; Drying Operation - Easy Home R09 Manual De Instrucciones

Cool/fan mode
Start: Ensure the unit is plugged in and power is
available. The operation light on the display panel of
the unit will light up.
1. Press MODE select button. Press to select
COOL or FAN.
2. TEMP/TIME button: Set the desired tempera-
ture, typically between 62-86
3. FAN SpEED button: Press to select AUTO,
LOW, MED or HIGH.
4. ON/OFF button: When the air conditioner is off,
push this button to start it. Push this button
again to stop the air conditioner.
Note: The FAN mode does not control temperature.
Therefore, perform only steps 1,3 and 4 to select this mode.

Drying operation

Start: Ensure the unit is plugged in and power is
SET TEMP .
available. The operation light on the display panel of
E
the unit will light up.
1. Press MODE select button. Press to select DRy.
F
2. TEMP/TIME button: Set the desired tempera-
SET TEMP .
ture, typically between 62-86
E
3. ON/OFF button: When the air conditioner is off,
push this button to start it. Push this button
F
again to stop the air conditioner.
Note: The fan speed cannot be adjusted when the unit
is in AUTO or DRy modes.
AUTO
AUTO
F (17-30 C).
o o
F (17-30 C).
o o
Fan only mode and drying operation
COOL
COOL
C LO C K
FAN SPEED
1
C LO C K
2
FAN SPEED
1
2
C LO C K
FAN SPEED
3
1
C LO C K
2
FAN SPEED
3
1
2
A U T O
C LO C K
FAN SPEED
A U T O
C LO C K
1
FAN SPEED
DRY FAN
DRY FAN
SET TEMP .
4
3
SET TEMP .
4
3
SET TEMP .
SET TEMP .
SET TEMP .
SET TEMP .
24
2