Replacing Oven Lamp; Cleaning Oven Glass - De Dietrich DOE7900XE Manual De Instrucciones

REPLACING OVEN LAMP

WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on the
left side. If you have difficulty in turning, then using plastic gloves will
help you in turning.
Then remove the lamp by turning, install the new lamp with same
specifications.
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 lamp assembly:

CLEANING OVEN GLASS

Lift by pressing on plastic latches on left and right side as shown in
figure 12 and pulling the profile toward yourself as in figure 13. Glass is
released after profile is removed as shown in figure 14. Remove the
released glass by pulling toward yourself carefully. Outer glass is fixed
to oven door profile. You can perform glass cleaning easily after glasses
are released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that profile
is seated properly in place.
Figure 12
220-240 V, AC
15-25 W
Figure 10
EN
Type E14 lamp assembly:
Figure 13
19
220-240 V, AC
15 W
Figure 11
Figure 14