Technical Specifications; Installation Of Appliance - De Dietrich DOE7900XE Manual De Instrucciones

TECHNICAL SPECIFICATIONS

Specifications
Lamp power
Thermostat
Lower heater
Upper heater
Turbo heater
Grill heater
Supply voltage
Technical specifications can be changed without prior notice to improve
product quality.
The values provided with the appliance or its accompanying documents
are laboratory readings in accordance with the respective standards.
These values may differ depending on the use and ambient conditions.
Figures in this guide are schematic and may not be exactly match your
product.

INSTALLATION OF APPLIANCE

Ensure that electrical installation is suitable for operationalising the
appliance. If not, call an electrician and plumber to make necessary
arrangements. Manufacturing firm can't be hold responsible for damages
to arise due to operations by unauthorized people and product warranty
becomes void.
WARNING: It is customer's responsibility to prepare the location the
product shall be placed on and also have power utility prepared.
WARNING: The rules about electrical local standards must be adhered to
during product installation.
WARNING: Check for any damage on the product before installing it.
Do not have product installed if it's damaged. Damaged products pose
danger for your safety.
EN
90 cm Built-In Oven
15-25W
40-240 / Max °C
2000W
1500W
1 x 2200 / 2 x 1250W
3250W
220-240V AC 50/60 Hz.
7