Assembly; Carton Contents; Install Feet And Wheels - Westinghouse WGen5300cv Manual Del Usuario

ASSEMBLY

CARTON CONTENTS

Weight hazard. ALWAYS have assistance when lifting
the generator.
1. Carefully open the carton.
2. Remove and save the carton contents.
3. Remove and discard the packing tray.
4. Unfold the top of the plastic bag enclosing the generator.
5. Carefully cut the vertical corners of the carton to access
the generator.
6. Recycle or dispose of the packaging materials properly.
CARTON CONTENTS
• User manual
• Quick Start Guide
• Bottle of SAE 10W-30 oil
• Spark plug wrench
• Wrench
• Oil Funnel
• Wheel and mounting foot components:
Item
• Mounting foot
• Flange bolt, M8
• Wheel
• Axle pin
• Washer
• Cotter pin
If any parts are missing, contact our service team at
service@wpowereq.com or call 1-855-944-3571.
Quantity
2
4
2
2
2
2

INSTALL FEET AND WHEELS

Assembling the generator will require lifting the unit on
one side. Install the mounting feet and wheel before
adding fuel or oil.
1. Place generator on a flat surface.
2. Tip the generator on a piece of cardboard or other soft
material to protect the frame paint and prevent the
generator from sliding.
3. With the included wrench, install the mounting feet to
the frame as shown.
4. Install the wheels as shown.
Note: The wheels are only intended for hand transport.
The wheels are not suitable for towing the generator
either on or off-road.
Westinghouse Outdoor Power Equipment, LLC | 11
ASSEMBLY
NOTICE