Yamaha Banshee YFZ350T Manual Del Propietário página 266

q
1. Drain bolt
1. Boulon de vidange
1. Perno de vaciado
Transmission oil replacement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes
and then stop it.
3. Place a container under the engine to col-
lect the used oil.
4. Remove the oil filler cap and drain bolt to
drain the oil.
5. Install the drain bolt, and then tighten it to
the specified torque.
Tightening torque:
Drain bolt:
20 Nm (2.0 m0kgf)
6. Fill the engine with the recommended oil,
and then install the oil filler cap.
8-19