Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
PLAY
MODE
"P 1" indicates Programme 1 is selected.
2
Press (2) (N ) repeatedly until "DEL"
appears.
PLAY MODE
To delete Programme 2, press (5) (n )
repeatedly until "PGM 2" appears.
3
Press (6) (ENTER) for two seconds.
EN
PLAY MODE
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
12
TRACK
ENTER
ENTER
ENTER
Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
TRACK
PLAY
MODE
ENTER
"P 1 " indicates Programme 1 is selected.
To select Programme 2, press (5) (n )
repeatedly until "P 2" appears.
2
Press (2) (N ) or (5) (n ) to select the
track slot number where you want to
insert a track.
TRACK
PLAY
MODE
ENTER
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
5
To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 12 slots have been filled, "*Mem
Full*" appears in the display, and you cannot
insert tracks.
6
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
7
Press (SHIFT).
Track slot number