Sony CDX-C880R Manual De Instrucciones página 31

Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" indicates Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (5) (n)
repeatedly until "P 2" appears.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
Track slot number
DISC TRACK
PLAY MODE ENTER
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled,
"*Mem Full*" appears in the display, and you
cannot insert tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Erasing tracks in a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" indicates Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (5) (n)
repeatedly until "P 2" appears.
2
Press (2) (N) or (5) (n) to select the
track you want to erase.
Track slot number
DISC TRACK
PLAY MODE ENTER
The track currently registered in slot 6 of
Programme 1.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DISC TRACK
PLAY MODE ENTER
µ
DISC TRACK
PLAY MODE ENTER
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6
Press (SHIFT).
EN
31