Bosch Relaxx'x BGS5 Serie Instrucciones De Uso página 16

Figure
a ert the telescopic tube into the connecting piece
the floor tool. To release the connection, turn the
e slightly and pull it out of the floor tool.
the telescopic tube into the connecting piece of
e floor tool until it locks in place. To release the
ection, press on the locking collar and pull out
e telescopic tube.
the telescopic tube by moving the sliding
in the direction of the arrow and ad
esired length. The slide resistance on carpet is at
lowest when the telescopic tube has been com
etely pulled out.
ace the accessories holder in the required position
the telescopic tube.
e some pressure to insert the upholstery nozzle
brush ring and the crevice nozzle into the acces
es holder from above or below.
the power cord by the plug, pull out to the
equired length and insert the plug into the mains
et.
switch the vacuum cleaner on or off, press the
button.
e required suction level can be set to any level by
the control knob.
power range
vacuuming delicate materials, such as delicate
ery, curtains, etc.
edium power range
daily vacuuming of floors which are only slightly
power range
vacuuming durable floor coverings, hard floors
and heavy deposits of dirt.
tools are sub ect to a certain amount of wear,
epending on the type of hard floors you have (e.g.
rustic tiles). Therefore, you must check the
erside of the floor tool at regular intervals. Worn
ersides of floor tools may have sharp edges that
an damage sensitive hard floors, such as parquet or
eum. The manufacturer does not accept any res
for damage caused by worn floor tools.
et the ad
and carpets
ard floors
you are vacuuming up larger particles, make sure that
vacuum them up successively and carefully to ensu
e that the vacuum channels of the floor tool do not
ecome blocked.
necessary, you should raise the nozzle in order to
to the etter vacuum up the dirt particles.
ach the nozzles to the suction pipe or hand grip as
equired
evice nozzle for vacuuming crevices and corners,
etc.
ery nozzle for vacuuming upholstered furnitu
e, curtains, etc.
ery nozzle with fixed brush ring for vacuu
window frames, cupboards, profiles, etc.
er use, reinsert the crevice nozzle and upholstery
e into the accessories holder.
essional crevice nozzle
a-long crevice nozzle for cleaning crevices, cor
ers and narrow spaces, e.g. in a car.
essional upholstery nozzle
gently and thoroughly cleaning upholstered furni
e, curtains, etc.
clean the professional upholstery nozzle, simply
acuum it using the handle.
ard-floor tool for vacuuming hard floor coverings
es, parquet flooring, etc.)
acuum from below to clean the tool.
e scissors to cut through threads and hairs wound
the rollers, then vacuum them up.
can use the parking aid on the side of the vacuum
eaner if you wish to stop vacuuming for a short time.
er switching off the appliance, slide the hook on
e floor tool into the parking aid.
en vacuuming stairs, the appliance must be positio
ed at the bottom of the stairs. If it does not reach far
enough, the appliance can also be carried using the
arrying handle.
off the appliance.
out the mains plug.
efly pull the power cord and release. (The power
retracts automatically).
*
ependent on model
able floor tool
arquet
9