Bosch Relaxx'x BGS5 Serie Instrucciones De Uso página 18

Figure
the plate filter is particularly dirty, the dirt can also
e washed off.
a the bottom part of the filter unit anticlockwise
as far as it will go.
ake the plate filter out of the filter unit.
ash the plate filter under running water.
en it has dried completely, insert the plate filter
the filter unit and lock the bottom part by tur
it clockwise.
Under normal circumstances, and when vacuuming nor-
mal household dust, the plate filter does not need to be
removed or cleaned manually in order to achieve the
vacuum cleaner's optimum power level.
simple cleaning without water, simply tap the fil
er around the edge of the cap.
more thorough cleaning, rinse the filter from the
e with water, and allow it to dry completely
efore using it in the vacuum cleaner again.
e fluff filter should be cleaned at regular intervals in
er to ensure optimum operation of the vacuum clea
er.
en the appliance lid and remove the dust contai
er from the appliance.
ake the filter unit out of the dust container.
ean the fluff filter.
is usually sufficient to lightly shake or tap out the
er housing when the dust container is emptied to
e any particles of dirt.
this is not sufficient, you can use the brush which
supplied with the appliance or a dry cloth to remo
e dirt particles from the surface.
you want to wash the fluff filter, you must first
emove the plate filter from the filter unit. The plate
er must only be reinserted into the filter unit after
e fluff filter has completely dried.
e motor protection filter should be cleaned regularly
knocking out the dirt and rinsing.
en the appliance lid and remove the motor protec
filter.
ean the motor protection filter by tapping out the
If it is very dirty, the motor protection filter
be rinsed. Then allow the filter to dry comple
ely.
er cleaning the motor protection filter, reinsert it
the appliance and close the appliance lid.
e exhaust filter is designed so that it does not need
be replaced, provided the appliance is used as inten
ed in the household.
18
ensure that the vacuum cleaner is working at its
power level, the exhaust filter should be
eplaced after 1 year. The filtering action of the filter
emains intact, even if the filter surface becomes dis
ed.
en the appliance lid and remove the dust contai
er.
18
e the locking tab to open the side flap.
the two locking tabs to unlock the filter unit with
filter and remove it from the appliance.
ap out the filter unit and rinse it under running
ater.
reinsert the filter unit into the appliance after it
as dried completely and ensure that it audibly clicks
place.
e the side flap until you hear the locking tab
into place again.
ert the dust container into the appliance and
e the appliance lid.
en the appliance lid and remove the dust contai
er.
18
e the locking tab to open the side flap.
the two locking tabs to unlock the filter unit with
am filter and micro filter and remove it from the
appliance.
emove the foam filter and micro filter from the filter
ame.
am filter and micro filter and rinse it under running
ater.
not re-insert the foam filter and the micro filter
the filter frame until it has dried completely
ert the filter unit in the appliance and ensure that
e locking tabs audibly click into place.
e the side flap until you hear the locking tab
into place.
ert the dust container into the appliance and
e the appliance lid.
ays switch off the vacuum cleaner and disconnect
e power cord from the mains before cleaning the
acuum cleaner. The vacuum cleaner and plastic acces
es can be cleaned with an ordinary plastic cleaner.
ect to technical modifications.
*
ependent on model
11