Positioning The Patient For The "Ceph Ll" Examination - Myray hyperion Manual Del Usuario

Ocultar thumbs Ver también para hyperion:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
5.3b Positioning the patient for the "CEPH LL" examination
The unit is moved by carrying out the following tasks. The operator must:
TESTO SOTTOLINEATO
TESTO GRASSETTO
5.5.a
TABELLA LAYOUT
TABELLE
Make sure the machine is always in its home position before beginning any patient positioning tasks or any exposure
programme.
If hyperion is not in its home position press the
ments and reach the correct position before bringing the patient to the machine.
If you wish to interrupt movement press the
Always remember to change the disposable covers before positioning a new patient.
Before positioning the patient, make sure all metal objects/accessories such as glasses, denture plates, earrings
and any other removable metal objects at head level are removed. If a radiation protection bib is used make sure the
patient's neck is not covered otherwise there will be an area of image not exposed to X-rays.
To execute CEPH projections, hyperion has a head holder with auricular and nose supports to help a standing patient
maintain the correct position. Patients who are very short, very tall or in a wheelchair can, however, do the examination
sitting down.
Preliminary tasks:
• Select the CEPH LAT-LAT STD examination on the hyperion control panel;
• If the hyperion unit is equipped with one image detector, position it on the teleradiography arm;
• If not already in position, turn the head holder manually so that the nose support is at the front (figure 1);
• Open the auricular rods of the head holder to their maximum aperture;
• Place the hygiene covers on the auricular supports;
• Rotate the nose support 90°, setting it to a vertical position.
Bring the patient close to the teleradiography arm (patient orientated with sagittal plane parallel to movement of image
detector) and adjust the height of the motor-driven column by using the keys so that the auricular supports of the head
holder are level with the patient's outer ear canal.
Have the patient move backwards underneath the head holder; ask him/her to maintain an erect position with a natural
posture and eyes facing forwards.
Make sure the Frankfurt plane is horizontal.
Close the auricular rods carefully so they are placed in the patient's outer ear.
Rotate the nose support into a vertical position and adjust it vertically so that its lower extremity rests on the patient's
nose tip (see figure 1).
Ask the patient to remain still with his/her mouth closed.
Fig. 1
hyperion
- OPERATING INSTRUCTION
● watch over the patient carefully and, in the event of any risk of impact between patient and
equipment, interrupt movement immediately by releasing the control key;
● prevent the patient from assuming any incorrect positions (hands or other body parts in
inappropriate areas) or moving from the examination execution zone.
key (reset) again.
(reset) key once and wait for the machine to complete its move-
EN
45

Publicidad

Tabla de contenido
loading

Tabla de contenido