Product Description; Component Specifications - 3M PROTECTA AM401G Manual Del Usuario

PRODUCT DESCRIPTION:

This device is a Type B transportable Anchorage Device Sheathed Steel Sling. It is designed to attach to a personal fall arrest
system and is in conformity with standard EN 363.
The Sheathed Steel Slings can also be used as end termination for 3M approved EN795: 2012 Type C Horizontal Lifeline
Systems.
System Specifications:
Capacity: For Type B anchorage devices, the bearing structure must be capable of tolerating a load
of 12 kN for 3 min without breaking.
In all cases, make sure the fall arrester system connector is compatible with the anchorage.
Diameter
Cable: 6mm
Dimensions: Figure 1- Length of Sheathed Steel Sling models:
Standards: Meets the test requirements of EN795:2012 Type B
Maximum For the devices in class C (LIFE LINES), the maximum forces that can be applied are as follows:
Capacity
• Terminal Structural Anchorage: 22 kN
• Intermediate Structural Anchorage: 0.6 kN
Refer to the following table to see the descriptions for callouts in Figure 1.

Component Specifications:

Figure 1
Reference
1
2
3
4
5
6
Labels:
Ref.:
N° Serie Serial Num.:
ID:
EN 795:2012 TYPE B
TP TC019/2011 3M.com/FallProtection
Table 1 – Specifications
Component/Dimension
Thimble
Ferrule
Label
Cable
PVC Sleeve
Sling Length
2797
Longueur
Length:
Date Fab.
Mfg. Date:
06511 Carros France
M90ETIQ080
AM401G/Length=1M
AM402G/Length=2M
3