Simple Weighing - Adam Equipment EQUINOX EAB Manual De Usuario

5.0 SIMPLE WEIGHING

Stability symbol
On the entry weighing screen, the area
displaying the weight shows the weight
value on the top of the balance's
weighing plate/ Top pan.
Use the -0- key to set a new zero point
and reset all tare values.
If working with containers, first zero the
balance. Place the container and
press the "-T-"key.
Or use the Tm key to enter a known
tare value manually.
The Net symbol on the display
indicates the net weight. Press "Net"
to see the gross weight "Lrd".
"T= "indicates the tare value
captured.
Place the material to be weighed on
the balance and wait for the stability
symbol (see previous image) to light
up before detecting the value.
14
© Adam Equipment 2018