Confirm by tapping the "Yes" key or cancel
the operation by tapping the "No" key.
User password
By selecting the "User Password" function,
you will be able to assign a "Standard" or
"Administrator" user password.
You will then be asked to re-enter the
password for confirmation.
Enter it and tap the "OK" key.
From this moment on, every time you want
to access the user, you will be required to
enter your password.
N.B. Write down your password and
store it in a safe place.
Warning! In case of loss, you will only
be able to recover the password for the
"Standard"
user.
The
recovery
procedure is described in chapter 6.3.1.
23
© Adam Equipment 2018