Adam Equipment EQUINOX EAB Manual De Usuario página 9

3) Then connect the power adapter to the power outlet near the balance. Do not use
cables/extensions that do not comply with applicable regulations.
N.B. Check that the power shown on the balance plate label corresponds to the one in
use in the country of use.
ETB models
1) Level the balance by adjusting the legs on the front of the balance.
Adjustable feet
Spirit level
2) Insert the supplied power supply unit jack into the connector on the back of the balance.
3) Fit the top pan onto the 4 prongs located on the sub pan, adjust until stable.
4) Then connect the power adapter to the power outlet near the balance. Do not use
cables/extensions that do not comply with applicable regulations.
© Adam Equipment 2018
7