Setting The Peripherals - Adam Equipment EQUINOX EAB Manual De Usuario

6.9

SETTING THE PERIPHERALS

This section describes the features and settings of the RS232 and USB serial outputs that the
balance is equipped with.
In the setup menu, select the "Setup" function and then the "Communication" functions.
© Adam Equipment 2018
In the "Communications" menu screen, you can
immediately check the values of the parameters
set (in the box on the right of the parameter).
Tapping the parameter key to be set will activate
its screen with the list of the various selectable
options.
 Printer: this function allows you to select the
pre-programmed balance connected to the
serial output.
 ATP: command print, by touching the
"Print" button for the Adam ATP printer.
 Adam DU: command print, by touching the
"Print" button for the Adam DU software.
 Generic: command print, by touching the
"Print" button for generic serial type printer.
32