Selecting The Unit Of Measurement - Adam Equipment EQUINOX EAB Manual De Usuario

6.6

SELECTING THE UNIT OF MEASUREMENT

Weighing operations can be performed with different units of measurement. Below is shown
how to select the desired weighing unit.
In the settings menu, select the "Setup" function and then the "Units selection" function.
© Adam Equipment 2018
 Auto-zero: automatic zero constantly adjusts
the weight value shown to zero. Variations
may be due to dirt, moisture or dust that can
be deposited on the plate. You can disable
this function by selecting
Autozero 1 is for minor correction until it
reaches level 3E which is the maximum
correction.
On the "Units Selection" screen, all available
weighing units are immediately displayed. Tap
the desired unit to select and enable it.
The last three units of measure, K1, K2, K3, are
customizable units. For reference, refer to the
chapter 6.7
measurement units".
N.B.: The measurement unit selection can
also be made directly from the weighing
screen; by tapping the symbol of the current
unit displayed, you will have access directly
to the list of available units.
27
"Off"
"Selecting the
mode.
custom