Adam Equipment EQUINOX EAB Manual De Usuario página 37

© Adam Equipment 2018
 Line feed: this function allows you to set a
blank number of lines to add at the end of the
printout to allow the printer to exit from it.
The input numeric keypad will automatically
turn on, so enter the desired number of lines
(between 0 and 9) and tap the "Enter" key to
confirm the entered number.
 GLP: this function allows you to enable or
disable the GLP data printing after user have
entered it
 On. GLP data print enabled.
 Off. GLP data print disabled.
 Time and date: this function enables you to
enable or disable the time and date printing.
 On. Calibration data print enabled.
 Off. Calibration data print disabled.
Time and date printing cannot be deactivated
with the GLP function enabled.
 Balance cal. data: this function enables you
to enable or disable the calibration data
printing of the balance.
 On. Calibration data print enabled.
 Off. Calibration data print disabled.
35