Adam Equipment EQUINOX EAB Manual De Usuario página 71

© Adam Equipment 2018
To recall the formulation entered in the
database, use the "Select From List"
command, select the formulation you want
and proceed as shown below.
After selecting the desired formulation, a
summary screen will be displayed showing
all the components and their amount
needed to make the formulation.
Tap the "Ok" key to confirm and proceed
by entering the multiplication factor needed
to determine the total amount of the
formulation.
(i.e. if the formulation has been stored to
produce 10g of product and you want to
produce 100g insert a "K" factor of 10). If
the entered value does not allow the dosing
of one of the components because its
quantity exceeds the scale capacity, it will
not be accepted.
If the total weight of the formulation instead
exceeds the scale capacity, but the
individual components are lower, the user
will be asked whether to proceed with the
"separate formulation".
 Yes: to proceed with the separate
formulation.
 No: to change the value of the
multiplier factor "K" and reduce the
quantities.
The formulation screen shows the type of
formulation you are using by displaying two
symbols as described below:
Symbol displayed in case of "unique
formulation".
Symbol displayed in case of "separate
formulation ".
69