Edit user
In the "Edit user" menu, you can change
the user type ("Standard or Administrator")
and temporarily unlock the standard user
locked settings.
Type
If the user is a standard type in order to
modify the user type, a user's password
with administrator rights will be required.
Select "Standard" to set the user in
standard mode or select "Administrator"
to set the user with administrator rights.
Settings
Selecting this function will prompt you to
enter a user's password with administrator
rights.
Then select the "Enable" function to
temporarily unlock the standard user or
select the "Disable" function to lock the
user again.
After you unlock the user in the base
screen on the left side of the username, an
open padlock will appear.
Unlocking will remain active until it is locked
again through the user editing menu, or
when another user is selected or the
balance is turned off.
21
© Adam Equipment 2018