Adam Equipment EQUINOX EAB Manual De Usuario página 51

© Adam Equipment 2018
 Reference weight: enter the reference
weight value in manual weight mode.
 Options: you can select the statistical
control by activating the "Statistics"
function or the weight check by
activating the "Value check" function.
Statistics:
To enable this function, you need to enter:
 Nominal value: Enter the nominal
weight value to be checked.
 T2+, T2-, T1+, T1-: enter the error
tolerance threshold values. (Optional
entry).
 Save: tap the "Save" button to store
the recorded record
Check weighing:
To enable this function, you need to enter:
Lower limit:

acceptable weight value.
 Upper limit: enter the maximum
acceptable weight value.
 Sound: you can activate or deactivate
the beeper function when the weight is
within the set range.
 Save: tap the "Save" button to store
the recorded value.
49
enter the minimum