Accessing The Web Application Via The Hotspot; Calling Up The Web Application Via Wifi; Charging; Vehicle Charge Port - Porsche Mobile Charger Connect Manual De Instrucciones

Ocultar thumbs Ver también para Mobile Charger Connect:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83

Charging

DE
Information
EN
– Depending on which browser you are using,
the web application will not open immediately,
FR
but information about the browser's security
settings will be displayed first.
IT
– You need to enter the network key for calling up
ES
the web application. How you do this depends
on your device's operating system.
PT
NL
Accessing the web application via
the hotspot
SV
The web application can be called up using a device
FI
(PC, tablet or smartphone) via a hotspot set up by
DA
the charger.
To set up a hotspot:
NO
f Refer to chapter "Hotspot" on page 31.
EL
e To call up the web application while a hotspot is
active, enter the following IP address in the
CZ
browser's address line: 192.168.0.1
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
32
Calling up the web application
via WiFi
The web application can be called up in the browser
on a device (PC, tablet or smartphone) that is logged
into the same home network as the charger.
e Enter the current IP address of the charger in the
browser's address line. You will find the current IP
address under S
> N
ETTINGS
ETWORK
.
INFORMATION
– or –
e Enter the host name of the charger in the
browser's address line. You will find the host
name in the letter containing access data.
Charging

Vehicle charge port

For information on connecting and disconnecting the
vehicle cable to and from the vehicle charge port and
for the charging and connection status at the vehicle
charge port:
f refer to the Driver's Manual.
Electric shock, fire
DANGER
Risk of serious or fatal injury due to fire or electric
shock.
e Always observe the specified sequence for the
charging procedure.
e Do not unplug the vehicle cable from the vehicle
charge port during charging.
e End the charging process before disconnecting
the vehicle cable from the vehicle charge port.
e Do not disconnect the charger from the electrical
socket during charging.
Errors are shown on the display and are indicated by
red status LEDs. The error message, the cause and a
remedial measure is displayed.
f Refer to chapter "Malfunctions" on page 34.

Starting charging

1. Insert the plug into the electrical socket.
Power button lights up white.
Status LEDs light up white.
The display switches on.
2. Insert the vehicle plug into the vehicle charge
port.
Power button lights up white.
Status LEDs pulsate white.
For information on connecting the vehicle cable
to the vehicle charge port:
f see Driver's Manual.
Following a successful self-test and when the
connection is established, the status LEDs light
up white.
3. Charging starts automatically.
Power button lights up white.
Status LEDs pulsate green.

Publicidad

Tabla de contenido
loading

Tabla de contenido