Opening The Web Application Via Wifi; Using The Web Application - Porsche Mobile Charger Connect Manual De Instrucciones

Opening the web application via WiFi

The Web Application can be opened in the browser
on a device (PC, tablet or smartphone) that is logged
into the same home network as the charger.
– Enter the current IP address of the charger in
the browser's address line. You will find the IP
e Network e Network
address in Settings
information.
– or –
Enter the host name of the charger in the brows-
er's address line. You will find the host name in
the letter containing access data.
g For information on the web application, see the
manual at https://www.porsche.com/international/
aboutporsche/e-performance/help-and-contact/

Using the web application

Opening the web application
Establishing a connection to the charger
If the charger was integrated in your existing home
network (WiFi or Powerline Communication) during
setup, the Web Application can be accessed using
the assigned IP address.
For information on establishing network connections,
g Refer to chapter "Connections" on page 74..
Opening the web application via WiFi
b Your device and the charger are located in the
same WiFi network.
1. Open your browser.
2. In the browser address bar: Enter the IP address
that was assigned during configuration (in Set-
e Networks e Network information on
tings
the charger), or the host name of the charger (in
the letter containing your access data).
Opening the web application via Powerline Com-
munication
b Your device and the charger are in the same
network via a PLC connection.
1. Open your browser.
2. In the browser address bar: Enter the IP address
that was assigned during configuration (in Set-
e Networks e Network information on
tings
the charger).
Opening the web application via hotspot
Alternatively, a connection can be established via a
hotspot. The charger has a wireless access point
(hotspot), which is password-protected and requires
manual login. A WiFi-capable device can connect to
the hotspot and then access the Web Application
of the charger. In the Web Application, you can inte-
grate the charger in the home network at any time.
b The charger is switched on. The charger auto-
matically enables its WiFi hotspot.
1. On your device, press the network or WiFi icon
on the taskbar or notification panel.
2. Select your WiFi network from the list. The name
of the WiFi network is the same as the SSID in
the letter containing access data, and is shown
as ICCPD-#######.
3. Press the Connect button.
4. In the Security code field, enter the security code
(shown as WiFi PSK in the letter containing your
access data).
�� The connection to the WiFi network is es-
tablished.
Note: In the Windows 10 operating system,
you are first asked to enter the router PIN.
Select the link Connect using a network se-
curity code instead, then enter the code.
5. Open your browser.
6. Enter the following IP address in the address bar
of your browser: 192.168.0.1.
Operating
73