Technical Parameters - GRAPHITE 58G046 Instrucciones De Uso

replace both carbon brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All defects should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Power supply frequency
Rated power
Blade stroke cycles (without load)
Maximum thickness of cut ma-
terial
Blade stroke length
Protection class
Weight
Year of production
NOISE AND VIBRATION DATA
Information regarding noise and vibration
The following levels of emitted noise, such as emitted acoustic pressure Lp
and measurement uncertainty K have been given in the instruction manual as defined in the EN 60745
standard.
The following vibration value (acceleration value) a
ned as defined in the EN 60745-2-11 standard.
The vibration level provided in this instruction manual have been determined according to the measure-
ment procedure as defined in the EN 60745 standard and can be used for comparison of power tools. This
can be used for preliminary assessment of exposure to vibrations.
The provided vibration level is representative for main applications of the power tool. If the power tool is
used for other applications or with other working tools, and if it is not sufficiently maintained, the vibra-
tion level may vary. The aforementioned reasons may increase the exposure to vibrations during the entire
operating period.
In order to precisely estimate the exposure to vibrations, periods should be accounted for, in which the
power tool is switched off, or when it is switched on, but not operated. Thus, the total exposure to vibration
may prove considerably lower.
Additional safety measures should be taken to protect the user against effects of vibrations, such as: ma-
intenance of the power tool and its working tools, ensuring proper temperature of the hands and proper
organisation of work.
Sound pressure level Lp
A
Sound power level Lw = 97 dB(A), K = 3 dB(A)
A
Vibration value for cutting wood a
Vibration value for cutting metal sheet a

TECHNICAL PARAMETERS

Jigsaw
Wood
Metal
= 86 dB(A), K = 3 dB(A)
= 5,87 m/s² , K = 1,5 m/s²
h,B
= 6,25 m/s² , K=1,5 m/s²
h,M
230 V AC
500-3000 min
A
and measurement uncertainty K have been determi-
h
19
Value
50 Hz
400 W
-1
55 mm
6 mm
16 mm
II
1,5 kg
2016
and acoustic power level Lw
A