Kit Assembly - Metra 95-6557B Instrucciones De Instalación

1. Attach the radio brackets to the radio
using screws supplied with the radio,
and then secure into the dash opening.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
3. Snap the radio trim panel over the radio
and reassemble the dash in reverse
order of disassembly.
4

KIT ASSEMBLY

(Figure A)
|
386.257.1187 MetraOnline.com