Starmix IS Serie Instrucciones Para El Manejo página 27

11 First aid in the event of a fault
Malfunctions cannot always be traced back to defects in the vacuum cleaner.
Fault
Reduction in suction
Vacuum cleaner will not start
The vacuum cleaner does not start
when the tool is switched on in the
>RA< mode
PE emptying and disposal bag is sucked
against the filter
Vacuum cleaner classes M or H: with
inserted fleece filter bag dust in filter
Do not take any other action and contact the customer service workshop.
12 Genuine accessories
Use genuine accessories.
NOTE
Possible cause
Filter contaminated
fleece filter full
Container full
Nozzle, pipes or hose blocked
Mains plug plugged in?
Mains power missing?
Mains cable OK?
Cover closed properly?
Water sensor switched off?
Vacuum cleaner in readiness for opera-
tion "RA"?
Is the mains plug of the unit in the plug
socket?
Solenoid valve of compressed air auto-
matic switch-on* contaminated?
Position of rotary slider incorrect
Position of rotary slider incorrect
NOTE
Remedy
Clean.
Change.
Empty.
Clean.
Set to "I" (see "2 Display and Operating
Put the mains plug in the vacuum cleaner plug
socket
Flush the compressed air automatic switch-on* with
alcohol
Set rotary slider to ● position
emptying and disposal bag").
Set rotary slider to ▲ position
fleece filter bag").
Elements").
(see "6.4 Inserting PE
(see "6.3 Inserting
GB - 27