Wiring; Commissioning; Programming The Rts Transmitter; Checking The Direction Of Rotation - SOMFY LTN 50 PA RTS Guia De Instalacion

EN

3. WIRING

1) Cut off the mains power supply.
2) Connect the motor according to the information in the table below:
Neutral
Live
Live
Earth Yellow/Green

4. COMMISSIONING

To commission the motor, a RTS control point must be programmed.
N.B.: Only one motor can be powered at a time!

4. 1. PROGRAMMING THE RTS TRANSMITTER

Switch on the power supply.
Press the UP and DOWN buttons simultaneously on
the RTS transmitter: the jogs (move up and down
motor.

4. 2. CHECKING THE DIRECTION OF ROTATION

Press the RTS control point UP button:
1)
a) If the shade is raised, the direction of rotation is
correct.
b) If the shade is lowered, the direction of rotation
is incorrect: move onto the next step.
Press the RTS control point STOP/MY button
2)
until the shade jogs: the direction of rotation has
Press the RTS control point UP button to check
3)
the direction of rotation.
4
Blue
Brown
Black
Non contractual images
1
a
=
b
=
2
Copyright © 2016 Somfy SAS. All rights reserved.
3