Megger VF6 EX Guia De Inicio Rapido página 2

„ Read, understand and follow Safety Warnings and Operating Instructions
in the manual before using this product.
„
„ The detector's safety features may not protect the user if not used in accordance with the
manufacturer's instructions.
„ Check on a known live source within the rated AC voltage range of the detector before use to
ensure it is in working order.
„ Insulation type and thickness, distance from the voltage source, shielded wires, and other
factors may affect reliable operation.
„ The VF6 EX may help in the indication of live AC circuits only and must not be used as verifi-
cation of a de-energised circuit. This is not a Safety Test Lamp.
„ Do not use if the detector appears damaged or if it is not operating property. If in doubt
replace the product.
„ Do not use on voltages that are higher than as marked on the VF6 EX.
Use caution with voltages above 30 V AC as a shock hazard may exist.
„
„ Comply with all applicable safety codes. Use approved personal protective equipment when
working near live electrical circuits - particularly with regard to arc-flash potential.
„ Do not operate detector if Low Battery warning occurs. Replace batteries immediately.
Use only GP AAA / LR03 batteries; do not replace batteries when an explosive atmosphere is
„
present
NOTE: : The VF6 EX is unable to detect voltage on armoured or sheathed cable, cable in conduit,
behind panels or in metallic enclosures.
CATIV
Measurement category IV: Equipment connected between the origin of the low-voltage
mains supply outside the building and the consumer unit.
CATIII Measurement category III: Equipment connected between the consumer unit and the
electrical outlets.
CATII
Measurement category II: Equipment connected between the electrical outlets and the
user's equipment.
G
SAFETY WARNINGS